Manitou MSI 40 T S3 ST3B, Operator'S Manual

Page: 81 / 114

3-15
B8 – HYDRAULIC OIL LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped and mast tilted backward
and lowered as far as possible.
IMPORTANT
Use a clean funnel and clean the underside of the oil drum before filling.
- Refer to the dipstick 1.
- The oil level is correct when it is at the level of the red point.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL).
- Lift up the cab (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- Remove cap 2.
- Add oil through filler port 3.
- Refit the cap.
- Visually check that there is no leakage in the tank and pipes.
Always maintain the oil level at maximum as cooling depends on the oil flowing through the tank.
B9 – BRAKE OIL LEVEL
CHECK
Place the lift truck on level ground.
IMPORTANT
If the braking oil level is abnormally low, consult your dealer.
- Lift up the cab (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- The level is correct when it is at the MAX level on the tank.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through the
filler port 1.
- Visually check that there is no leakage in the tank and pipes.
B11 – CAB DOOR (OPTION)
GREASE
Clean and lubricate the points 1 (4 nipples) with grease (see: 3 - MAINTENANCE:
LUBRICANTS AND FUEL) and remove the surplus of grease.
1
1
2
3
1
B10 – WINDSCREEN WASHER LIQUID LEVEL
CHECK
- Lift up the cab (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- Visually check the level.
- If necessary, add windscreen washer fluid (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) through the filler port 1.
1
647177 (23/02/2017) MSI 40/50 T S3 ST3B