Manitou MSI 40 T S3 ST3B, Operator'S Manual

Page: 82 / 114

3-16
EXTERNAL CAB VENTILATION FILTER
- Open bay 3 to reach the protective casing.
- Pull and lift the protective casing 4.
- Lift out cab ventilation filter 5.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Refit the filter and protective casing.
B13 – REAR AXLE
GREASE
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
• 1 - Swivel pins (6 lubricators).
• 2 - Steering tie rods (4 lubricators).
• 3 - Rear axle oscillation pin (2 lubricators).
B12 – CAB VENTILATION FILTERS
CLEAN
INTERNAL CAB VENTILATION FILTER
- Lift out protective casing 1.
- Lift out cab ventilation filter 2.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Refit the filter and protective casing.
2
1
1
2
1
1
2
3
5
3
4
647177 (23/02/2017) MSI 40/50 T S3 ST3B