Manitou MLT625-75 H S1-E3, Operator'S Manual

Page: 84 / 160

10 - JIB HEAD SOLENOID VALVE + HYDRAULIC ATTACHMENT LOCKING 10 - JIB HEAD SOLENOID VALVE + HYDRAULIC ATTACHMENT LOCKING
Enables the use of a hydraulic function and hydraulic locking of the attachment on the Enables the use of a hydraulic function and hydraulic locking of the attachment on the
attachment circuit. attachment circuit.
To make connection of the rapid connectors easier, decompress the hydraulic circuit by To make connection of the rapid connectors easier, decompress the hydraulic circuit by pressing button 1 pressing button 1
on the solenoid valve. on the solenoid valve.
ATTACHMENT LINE A1/B1 CONTROL ATTACHMENT LINE A1/B1 CONTROL
- - Set switch Set switch 1 to positio 1 to positio n A (indi n A (indi cator light off). cator light off).
- - Push bu Push bu tton 2 fo tton 2 fo rward or backward. rward or backward.
ATTACHMENT A2/B2 LOCKING CONTROL ATTACHMENT A2/B2 LOCKING CONTROL
- - Set switch 1 to position B (indi Set switch 1 to position B (indi cator light on) and hold down button 3. cator light on) and hold down button 3.
- - Push button 2 forward to lock the attachment and Push button 2 forward to lock the attachment and backward to release it. backward to release it.
2-3 2-3 4 4
N N
° °
2 2
9 9
0 0
4 4
3 3
9 9
A1 A1
B1 B1
A2 A2
B2 B2
A1 A1
B1 B1
A2 A2
B2 B2
1 1
B B
A A
1 1
3 3
2 2
1 1
B B
A A
1 1
3 3
2 2
11 - ATTACHMENT HYDRAULIC CONTROL FORCED OPERATION 11 - ATTACHMENT HYDRAULIC CONTROL FORCED OPERATION
This OPTION must only be used with an attachment requiring continuous hydraulic movement of type: This OPTION must only be used with an attachment requiring continuous hydraulic movement of type:
brush, supply bucket, mixer brush, supply bucket, mixer , spray… It , spray… It is strictly forbidden in handling operations and at is strictly forbidden in handling operations and at all other events all other events
(winch, crane jib, crane jib with winch, hook, etc.). (winch, crane jib, crane jib with winch, hook, etc.).
CONTINUOUS HYDRAULIC MOVEMENT CONTINUOUS HYDRAULIC MOVEMENT OF THE OF THE A A TT TT ACHMENT ACHMENT
- - Simultaneously Simultaneously hold button 1 in the f hold button 1 in the f or or ward or backward position (according to th ward or backward position (according to th e type e type
of attachment) and switch 2 in position B (indicator light on). An audible beep will sound of attachment) and switch 2 in position B (indicator light on). An audible beep will sound
when activated. when activated. Release button Release button 1 1 and switch 2. and switch 2.
- - To stop the m To stop the m ovement, push again on the bottom of swi ovement, push again on the bottom of swi tch 1, or press pushbutton 2. tch 1, or press pushbutton 2.
NOTE: NOTE: If the operator leaves the driver's cab, the continuous hydraulic m If the operator leaves the driver's cab, the continuous hydraulic m ovement will ovement will
automatically stop and must be restarted. automatically stop and must be restarted.
1 1
https://www.forkliftpdfmanuals.com/