Manitou MLT625-75 H S1-E3, Operator'S Manual

Page: 112 / 160

3-2 3-2 6 6
REPLACING THE BRAKE REPLACING THE BRAKE ACCUMULA ACCUMULA TOR UNIT TOR UNIT FIL FIL TER TER
- - Unscrew plug 3 (fig. E3/3), lift out the filter and fit a new one (see: 3 - MAINTENANCE: Unscrew plug 3 (fig. E3/3), lift out the filter and fit a new one (see: 3 - MAINTENANCE:
FILTERS CARTRIDGES AND BELTS). FILTERS CARTRIDGES AND BELTS).
- - Refit and Refit and tighten plug 3 tighten plug 3 (fig. E3/3 (fig. E3/3 ) (tightening ) (tightening torque 70 to 80 torque 70 to 80 N.m) N.m)
52 - 59 lbf/ft 52 - 59 lbf/ft
. .
FILLING UP THE OIL FILLING UP THE OIL
- - Refit and t Refit and t ighten dra ighten dra in plugs 1 (f in plugs 1 (f ig. E3/1) ( ig. E3/1) ( tighteni tighteni ng torque 29 to 39 ng torque 29 to 39 N.m) N.m) 21-29 lbf/ft 21-29 lbf/ft . .
- - Fill up with oil (s Fill up with oil (s ee: 3 - MAINTENANCE: ee: 3 - MAINTENANCE: LUBRICANTS AND FUE LUBRICANTS AND FUE L) through filler port 4 (fig. L) through filler port 4 (fig.
E3/2). E3/2).
Use a clean container and funnel and clean the underside of the oil Use a clean container and funnel and clean the underside of the oil drum before filling. drum before filling.
- - Observe the oil level on dipstick 5 (fig. E3/4), the oil level should be at the level of the red Observe the oil level on dipstick 5 (fig. E3/4), the oil level should be at the level of the red
point. point.
- Check for any possible leaks at the drain plugs. - Check for any possible leaks at the drain plugs.
- Refit filler plug 2 - Refit filler plug 2 (fig. E3/2). (fig. E3/2).
E3/3 E3/3
3 3
4 4
2 2
E3/4 E3/4
5 5
E5 - SEAT BELT E5 - SEAT BELT
CHECK CHECK
SEAT BELT WITH TWO ANCHORING POINTS SEAT BELT WITH TWO ANCHORING POINTS
- Check the following points: - Check the following points:
• Fixing of the anchoring points on the seat. • Fixing of the anchoring points on the seat.
• Cleanness of the strap • Cleanness of the strap and the locking mechanism. and the locking mechanism.
• Triggering of the locking mechanism. • Triggering of the locking mechanism.
• Condition of the strap • Condition of the strap (cuts, curled edges). (cuts, curled edges).
REELED SEAT BELT WITH TWO ANCHORING POINTS REELED SEAT BELT WITH TWO ANCHORING POINTS
- Check the points listed above together with the following points: - Check the points listed above together with the following points:
• The correct winding of the belt. • The correct winding of the belt.
• Condition of the reel guards. • Condition of the reel guards.
• Roller locking mechanism when the strap is given a sharp tug. • Roller locking mechanism when the strap is given a sharp tug.
https://www.forkliftpdfmanuals.com/