Manitou MLT625-75 H S1-E3, Operator'S Manual

Page: 67 / 160

- - Adjust the locking lever until you reach the positi Adjust the locking lever until you reach the positi on required. This then locks and the seat on required. This then locks and the seat
will not shift into another will not shift into another position. position.
Only operate the lever by its recessed section and do not grasp from below, at the risk of crushing Only operate the lever by its recessed section and do not grasp from below, at the risk of crushing
the hand. the hand.
LUMBAR ADJUSTMENT (FIG. C) LUMBAR ADJUSTMENT (FIG. C)
This increases the comfort This increases the comfort of the seat and the driver’s freedom of movement. of the seat and the driver’s freedom of movement.
- - Turn the knob to Turn the knob to 1 to adjust the height 1 to adjust the height and depth of the l and depth of the l umbar support of the upper part umbar support of the upper part
of the back-rest. of the back-rest.
- - Turn the knob to 2 to adjust the hei Turn the knob to 2 to adjust the hei ght and depth of the lumbar s ght and depth of the lumbar s uppor uppor t of the lower part t of the lower part
of the back-rest. of the back-rest.
ANGLE ADJUSTMENT OF THE BACK-REST (FIG. D) ANGLE ADJUSTMENT OF THE BACK-REST (FIG. D)
- - Support the back-rest, pull the lever and positio Support the back-rest, pull the lever and positio n the back-rest to find the d n the back-rest to find the d esired esired
position. position.
If you do not support If you do not support the back-rest when making adjustments, it will swing forwards. the back-rest when making adjustments, it will swing forwards.
MAINTENANCE MAINTENANCE
Dirt may adversely affect the correct functioning of the seat. For this reason, make sure Dirt may adversely affect the correct functioning of the seat. For this reason, make sure
your seat is always clean. your seat is always clean.
- - The cushions do not The cushions do not require to be removed from the s require to be removed from the s eat frame for cl eat frame for cl eaning. eaning.
A rocking head-rest increases the risk of an A rocking head-rest increases the risk of an accident! accident!
First check the resistance of the fabric on a small concealed area before using any fabric First check the resistance of the fabric on a small concealed area before using any fabric
and plastic cleaner. and plastic cleaner.
2-17 2-17
D D
C C
2 - SAFETY BELT 2 - SAFETY BELT
- Sit correctly on the seat. - Sit correctly on the seat.
- Check that seat belt is not twisted. - Check that seat belt is not twisted.
- Place the seat belt at hip level. - Place the seat belt at hip level.
- Attach the seat belt and check that it - Attach the seat belt and check that it locks. locks.
- - Adjust the seat belt to your body shape without sque Adjust the seat belt to your body shape without sque ezing your hip and without over-slack. ezing your hip and without over-slack.
In no event should the lift In no event should the lift truck be used if the seat truck be used if the seat belt is defective (fixing, locking, cuts, tears, etc.). Repair or replace the seat belt immediately. belt is defective (fixing, locking, cuts, tears, etc.). Repair or replace the seat belt immediately.
3 - IGNITION SWITCH 3 - IGNITION SWITCH
The key switch has The key switch has five positions: five positions:
P - Ignition off, P - Ignition off, parking position. parking position.
O - Ignition switched of O - Ignition switched of f and I.C. engine stopped. f and I.C. engine stopped.
I - Ignition on. I - Ignition on.
II H ti II H ti
https://www.forkliftpdfmanuals.com/