Manitou MLT625-75 H S1-E3, Operator'S Manual

Page: 109 / 160

3-2 3-2 3 3
- Check for any possible leaks at the drain plug. - Check for any possible leaks at the drain plug.
- - Refit and tighten t Refit and tighten t he level and fill he level and fill ing plug 3 (fig. ing plug 3 (fig. D6/2) (tightening torque 34 D6/2) (tightening torque 34 to 49 to 49 N.m). N.m).
D7 - FRONT AXLE DIFFERENTIAL OIL D7 - FRONT AXLE DIFFERENTIAL OIL
DRAIN DRAIN
Place the lift truck on level ground Place the lift truck on level ground with the I.C. engine stopped and the d oil still warm. with the I.C. engine stopped and the d oil still warm.
Dispose of the drain Dispose of the drain oil in oil in an ecological manner. an ecological manner.
- Place a container under drain plug 1 (fig. D7) and unscrew - Place a container under drain plug 1 (fig. D7) and unscrew the plug. the plug.
- - Remove level and fill Remove level and fill ing plug 2 (fig. D7) in order to ensure that the oil ing plug 2 (fig. D7) in order to ensure that the oil is drained is drained
properly. properly.
- - Refit and Refit and tighten drain pl tighten drain pl ug 1 (fig. ug 1 (fig. D7) (tightening D7) (tightening torque 34 to 49 torque 34 to 49 N.m) N.m)
25-36 lbf/ft 25-36 lbf/ft
. .
- - Fill up with oil (see: 3 - MAINTENANC Fill up with oil (see: 3 - MAINTENANC E: LUBRICAN E: LUBRICAN TS AND FUEL) through filler port 2 (fig. D7). TS AND FUEL) through filler port 2 (fig. D7).
- The level is correct - The level is correct when the oil level is flush with the edge of the when the oil level is flush with the edge of the hole. hole.
- Check for any possible leaks at the drain plug. - Check for any possible leaks at the drain plug.
- - Refit and Refit and tighten the level tighten the level and filling and filling plug 2 (fi plug 2 (fi g. D7) (tighte g. D7) (tighte ning torque 34 to ning torque 34 to 49 49 N.m) N.m)
25-36 lbf/ft 25-36 lbf/ft
. .
D7 D7
2 2
1 1
3 3
2 2
https://www.forkliftpdfmanuals.com/