Sprint
®
2000
V.033007
20
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Number
Name
Function
7
BURNER
OPERATION
MAIN OFF Button
The red
BURNER
OPERATION MAIN OFF
button initiates burner shutdown.
When pressed, the gas
burner
shuts down and the green indicator light (5) turns
off.
To completely shut down the dryer, follow the procedure for the
START DRYER
OFF
button (2).
8
Green Tower
Light
When the Present Value
(PV)
temperature reaches the Set Value
(SV)
, the
green tower light on top of the main control panel turns on.
The
Green Tower Light
turns off whenever the Present Value
(PV)
temperature
is above or below the Set Value
(SV)
.
9
EMERGENCY
STOP Button
The red
EMERGENCY STOP
button shuts down the gas burner instantly and
stops all dryer operation.
Press the button in until it remains depressed to
activate
.
Turn the button slightly clockwise until it pops out to
deactivate
.
Note: Use the
EMERGENCY STOP
button
only
in emergency situations.
10
Audible Alarm
Speaker
An audible alarm sounds when the dryer is in
Flame Failure mode
, when there
is a
System Error
, when the circulation filter is clogged, or if the
Process
Temperature PV) changes
plus or minus 5 degrees F (3 degrees C) of the Set
Value
(SV)
.
11
CLEAN FILTER
Light
The red
CLEAN FILTER
light turns on when the stainless steel circulation filter
has become blocked by dirt or lint and needs to be cleaned.
Remove and clean the filter.
12
FAILURE Light
The red
FAILURE
light turns on when there is a
Flame Failure
or a
System
Error
.
13
ALARM OFF
Button
Press the yellow
ALARM OFF
button to silence audible alarms.
14
LED CONVEYOR
SPEED Display
The
CONVEYOR SPEED
LED displays conveyor speed in feet per minute or
meters per minute.
15
CONVEYOR
SPEED Knob
The
CONVEYOR SPEED
knob controls Conveyor Belt speed.
Turn the knob clockwise to
increase
speed.
Turn the knob counterclockwise to
decrease
speed.
5.2.1
Digital Temperature Controller
Setting the
Temperature
Press the Up Arrow or Down Arrow
button to reach the Set Value
(SV)
.
Each time a button is pressed, the Set
Value
(SV)
increases or decreases by
one degree.
If steady pressure is applied to the
buttons, the Set Value
(SV)
increases
or decreases rapidly.
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
