Reddi-Arm Operator’s Manual
Page 27
Mandako Agri Marketing (2010) Ltd.
3.6 CONTROLS
B
efore starting to work, all operators should familiarize
themselves with the location and function of all controls.
1. Transport Steering Lock:
The wheel frame axle lock is equipped with a spring-
loaded pin to lock the axle in its transport
configuration. Place the axle at right angles to the
frame and the lock pin will move into the hole in the
bottom plate. Always install the pin before
transporting or storing.
Tip: Slowly operate the steering circuit back and forth
until pin engages.
Pull up the pin and rotate 90° to release the lock pin.
The axle and wheels are now free to move back and
forth as required.
2. Hydraulic Selector Valve (Optional):
A two-way hydraulic selector valve is located at the
back of the machine to control the hydraulics to the
mower. The selector valve is controlled and
connected to the operator control box which gets
mounted in the tractor cab.
3. Hydraulic Circuit System:
The system is designed with optional 3 or 4 circuits
which control the following:
a. Wheel axle position.
b.
Mower deck height.
c.
Mower wings.
Fig. 9 Transport Steering Lock - Engaged/Disengaged
Fig. 10 Hydraulic Circuits
Fig. 11 Selector Valve
Fig. 12 Selector Valve Control Box
