Reddi-Arm Operator’s Manual
Mandako Agri Marketing (2010) Ltd.
Page 50
SECTION 7: REFERENCE
For information not included here, or for a digital copy of this manual, please call your dealer, or Mandako directly for
assistance (1-888-525-5892).
Specifications may change without notice.
7.1 BOLT TORQUE
CHECKING BOLT TORQUE
The tables shown below give correct torque values for various bolts and capscrews. Tighten all bolts to the torques
specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide.
Replace hardware with the same strength bolt.
8-Bolt wheel hub lug nuts should be torqued to 133 lb-ft.
10-Bolt wheel hub lug nuts should be torqued to 462 lb-ft.
Torque figures indicated above are valid for non-greased or non-oiled threads and heads unless otherwise specified.
Therefore, do not grease or oil bolts or capscrews unless otherwise specified in this manual. When using locking
elements, increase torque values by 5%.
•
Torque value for bolts and capscrews are identified by their head markings.
7.2 TIRE PRESSURE
The recommended tire pressure is specific to the tires on your machine. Match your tires to the table below to find the
right tire pressure for your tire. Never exceed the manufacturers maximum tire pressure rating!
320/70R15 (8-Bolt)
20-25 PSI
440/55R18 (10-Bolt)
18-25 PSI
7.2019
3-Plex Land Roller Operator’s Manual
Page 54
Mandako Agri Marketing (2010) Ltd.
7.2 bolT ToRQUe
CHeCKInG bolT ToRQUe
the tables shown below give correct torque values for various bolts and capscrews. tighten all
bolts to the torques specified in chart unless otherwise noted. check tightness of bolts periodically,
using bolt torque chart as a guide. Replace hardware with the same strength bolt.
ImPeRIal bolT ToRQUe sPeCIfICaTIons
torque figures indicated above are valid for non-greased or non-oiled threads and heads unless
otherwise specified. therefore, do not grease or oil bolts or capscrews unless otherwise specified
in this manual. When using locking elements, increase torque values by 5%.
•
torque value for bolts and capscrews are identified by their head markings.
bolt
Diameter
“a”
Bolt Torque •
sae 2
(n.m) (lb-ft)
sae 5
(n.m) (lb-ft)
sae 8
(n.m) (lb-ft)
1/4"
8
6
12
9
7
12
5/16"
13
10
25
19
36
27
3/8"
27
20
45
33
63
45
7/16"
41
30
72
53
100
75
1/2"
61
45
110
80
155
115
9/16"
95
60
155
115
220
165
5/8"
128
95
215
160
305
220
3/4"
225
165
390
290
540
400
7/8"
230
170
570
420
880
650
1"
345
225
850
630
1320
970
1-1/8”
651
480
1077
794
1939 1430
1-1/4”
508
375
1498 1105 2678 1975
