Reddi-Arm Operator’s Manual
Mandako Agri Marketing (2010) Ltd.
Page 30
Fig. 21 Stored
Fig. 22 Circuit 1
Fig. 23 Connected
Fig. 24 Wiring Harness
3.7.3 Connect hydraulic system
WARNING: High Pressure Fluid.
Wear eye and hand protection when searching for leaks.
Relieve pressure before adjusting. Keep components in
good repair.
1.
Use a clean cloth or paper towel to clean the dirt and
build-up from around the couplers and male tips.
2. Insert the male tips into the couplers. Be sure they
are locked in place.
3. Ensure the hoses are properly routed to prevent the
hoses from dragging on the ground. Make sure there
is enough slack to prevent hoses from being pinched
when turning.
Check the function of each circuit. Be sure they
function according to expectations. Reverse hoses if
they do not.
3.7.4 Connect Lights
1.
Connect the wiring harness by inserting terminal into
plug on tractor. Route harness properly to prevent
harness from dragging on the ground.
2. Check light function.
