Reddi-Arm Operator’s Manual
Page 21
Mandako Agri Marketing (2010) Ltd.
The Mandako Reddi-Arm acts as a link between a
tractor and a rotary mower giving the operator a greater
reach without putting themselves in unsafe positions.
The Mandako Reddi-Arm is made up of three main
components: hook-up component, main frame, and rear
axle.
A mower is attached to the back of the frame to cut the
grass on either side of the tractor. Rotational power to the
mower is provided by the tractor PTO into 2 right angle
gearboxes and across the top of the frame to the mower
attached to the back. Flanged bearings support the drive
shaft along the frame.
There are two different hydraulic options offered for the
Mandako Reddi-Arm.
The first option consists of three hydraulic circuits which
controls the following: one circuit controls a two-way
selector valve which operates the mower left and right
wings, one circuit operates the deck lift, and the other
operates the Reddi-Arm steering.
The second option consists of four individual circuits that
control the following: deck lift, mower left wing, mower
right wing, and Reddi-Arm steering.
The main components of the unit are as follows:
a. Main Frame
b. Rear Axle
c. 3-Point Hookup Arms
d. Jack
e. Top Gearbox Access Door
f. Hydraulic Storage Mount Plate
g. Electrical Connector
h. Hydraulic Coupler/Male Tips
i. Input Driveline
j. Safety Chain
k. Lift Arm Pin
l.
Lower Gearbox Access Door
m.
Lower Gearbox
n. Upper Gearbox
o. Connection Driveline
p. Grease Access Covers
q. Rear Driveline Rear Guard
r. Rear Driveline
s. Rear Driveline Front Guard
t. Electrical Outlet
u. Hydraulic Outlets
v. Rear PTO
w.
Transport Steering Lock
x.
Rear Drawbar
y. Operator Manual Cannister
z. Selector Valve Control Box
3.1 MACHINE COMPONENTS
(B)
(A)
(C)
(D)
(Y)
(W)
