Reddi-Arm Operator’s Manual
Mandako Agri Marketing (2010) Ltd.
Page 28
3.7 ATTACHING REDDI-ARM TO TRACTOR
3.7.1 Connect to 3-Point Hitch
Follow this procedure when attaching the Reddi-Arm to a
tractor:
1. Clear the area of bystanders, especially small
children.
2. Make sure there is sufficient room and clearance to
safely back up to the machine.
3.
Remove anti-sway blocks from 3-point hitch arms.
4.
Remove drawbar (or swing to the side and pin) from
the tractor if it will interfere with the PTO driveline
(refer to tractor manual for detailed instructions).
5.
Align the hitch arms while backing up using the jack
or moving the 3- point hitch arm height.
6. Stop engine, set park brake, remove ignition key, and
wait for all moving parts to stop before dismounting.
7. Install the mounting pin through the left arm and
secure with the retainer.
8.
Repeat with the right arm.
9.
Raise the 3-point hitch to remove the weight from the
jack.
Fig. 13
Anti-Sway Blocks
Fig. 14
Drawbar
Fig. 15 Aligning 3-Point Arms
Fig. 16 Aligning/Secured