Mamiya 645DF, User Manual

Page: 16 / 149

16
2.6 Attaching the Leaf Credo back
The Leaf Credo back is fully integrated with the camera body and
functions as a part of the whole camera system.
Ensure that the Mamiya 645DF+ camera mirror is up and the shutter is
open when there isn’t a digital back attached.
When attaching the Leaf Credo back to the camera body the shutter
closes and the mirror comes down.
First remove the cover. Next, ensure that the bottom part of the Leaf Credo
back is placed correctly in the lower locking mechanism on the back of
the camera body before the upper locking mechanism
A
+
B
is pressed
together. Failure to do this can cause an error with the camera body where
the shutter continuously opens and closes. If this occurs, remove the Leaf
Credo back. Make sure the camera body is powered, press the digital back
release button
2
while mounting the digital back, lock the mounted back
by sliding the digital back lock
1
toward the camera.
Be aware that the shutter should be in the correct starting position
(shutter open). If this is not the case, attach and remove the Leaf Credo
back again to make sure that the camera body gets in the correct
starting position.
Remove the Leaf Credo back by sliding the digital back lock
1
, pushing
in the digital back release button
2
, and by gently pulling away the top
of the back first. Be careful with the contacts and protective glass on
the back. Your Leaf Credo back should always be protected by its plate
when it is not attached to the camera.