Mamiya 645DF, User Manual

Page: 91 / 149

91
9.4 Auto Bracketing
Auto Bracketing can be used when it is difficult to determine your
exposure compensation value. This function automatically captures
different exposure variations in succession. The bracketing margin can
be selected as desired for shooting in Auto Bracketing mode.
1. Turn the Shutter Release Mode Lever to the
S
or
C
position. When set
at the S position, you can shoot a single frame with each full press of
the Shutter Release button. In the C mode, the camera takes a series
of three frames successively with one press of the shutter release
button.
2. Turn on Auto Bracketing by pressing the Auto Bracketing button
A
for approximately one second. The Auto Bracketing icon blinks on
the top LCD panel. Turn the front dial (before this indicator times out)
and change
OF on the display to On .
3. When the shutter button is pressed in Auto Bracketing mode, the
auto bracketing mark blinks on the LCD inside the viewfinder. The
bracket step width is displayed and the Auto Bracketing icon also
blinks.
4. To deactivate the bracketing function, press the Auto Bracketing set
button
A
, turn the rear dial, set auto bracketing mode to
OF
, and
release.
Then press the Auto Bracketing set button
A
or half-press the shutter
button to return to the normal display mode.
Notice:
When you want to cancel the auto-
bracketing mode, turn the rear dial
from
On
to
OF
.
Notice:
After multiple turns, the mark RP
appears in the main LCD.
Repeat turning leads to a countdown
being displayed on the main LCD
and after taking a photo the camera
returns to Auto Bracketing mode.
The setting for the Auto Bracketing is
stored by pressing any other button or
leaving the camera for five seconds.
P Av
Tv
M
X
CF
C1
C2
C3
A
P Av
Tv
M
X
CF
C1
C2
C3
P Av
Tv
M
X
CF
C1
C2
C3
Underexposure Bracketing Margin
Overexposure
Auto Bracketing Icon
Standard
Setting selection