Malvern Zetasizer Nano Series, Accessories Manual

Page: 10 / 126

Chapter 1 Introduction and accessory range
Page 1-4 MAN 0487
Additional accessories and options
A range of accessories and options are also available for more advance measurement
strategies.
MPT-2 Titrator and Vacuum degasser
The MPT-2 Titrator is used to perform pH, additive and dilution titrations. The
degasser is used to remove any dissolved gases from the titrants before dispensing
by the Titrator. This prevents any gaseous escape during the titration increasing the
accuracy and reproducibility.
Usage and operation is described in the MPT-2 Titrator and Vacuum degasser
user manual .

For use with all Zetasizer Nano instruments.
Flow-mode option
Instruments fitted with the flow-mode option can be connected to a size exclusion
chromatography (
SEC ) system and be used as a light scattering detector.
The following kit is available for use with the Zetasizer Nano when connected to a
SEC system. It includes the flowcell ZEN0023
.
Connection, use and operation of a flow-mode optioned Zetasizer Nano is
described in the
Flow-mode chapter later in this manual.

For use with all Zetasizer Nano instruments except the Nano Z .
If fitted, an option part number label will be attached to the front of the cuvette
holder. The flow mode option is included as a standard fitment on the Zeta-
sizer Nano ZSP.
High Temperature
These instruments have an increased temperature range of 0  to 120  .
If fitted the Zetasizer Nano instrument label will include an ‘ HT ’ identification
and an option part number label will be attached to the front of the cuvette holder.

For use with all Zetasizer Nano instruments except the Nano ZSP .
ZEN1006 Flow-mode option for Zetasizer Nano S and Zetasizer Nano ZS.
ZEN0116 Quartz flow cell kit for connection of the Zetasizer Nano to an SEC
system.
ZEN9063 Extends the upper temperature range of the Zetasizer Nano series
from 90

to 120
