MakerBot Replicator 2X, User Manual

Page: 51 / 64

51
E
TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
EXTrUDEr DiSASSEmBLy
CONTINUED
5. Unplug the motor wire harness
from the top of the extruder motor
and slide the motor assembly out
of the extruder.
6. The extruder is now broken down
into its main assemblies. To remove
any filament stuck in the thermal
barrier tube, run the Unload script
to heat the extruder and use a pair
of pliers to pull the filament free.
4. Set the extruder lever arm to the open position. The extruder lever arm is open when it points
out towards the side of the MakerBot Replicator 2X and closed when it points in towards the
other extruder.
DiAgNOSTiCS
LCD PANEL | TOP-LEVEL MENU
BUiLD FrOm SD
Displays the list of models on the SD card. Select one to start a 3D print.
PrEhEAT Allows you to preheat the extruder.
UTiLiTiES Tools that allow you to configure and maintain your MakerBot
Replicator 2X.
iNFO AND SETTiNgS Optional settings and information about the MakerBot Replicator 2X.
LCD: The Top-Level Menus