MakerBot Replicator 2X, User Manual

Page: 18 / 64

18
B
SETTING UP YOUR MAkERBOT REPLICATOR 2X EXPERIMENTAL 3D PRINTER
iNSTALLiNg ENCLOSUrE LiD
9a. Locate the box containing the acrylic
enclosure lid. The enclosure lid is shipped
in a separate box and is not included in the
same box as your MakerBot Replicator 2X.
The box containing the enclosure lid should
have arrived with the box containing your
MakerBot Replicator 2X.
9b. Unpack the enclosure lid and place it
over your MakerBot Replicator 2X so that it
covers the top of the MakerBot Replicator 2X,
the extruder cable, and the filament guide
tubes. The small indentations at the corners
of the lid should line up with the bolt heads on
the top of the MakerBot Replicator 2X’s frame.
9
Installing the Enclosure Lid