MakerBot Replicator 2X, User Manual

Page: 13 / 64

13
UNPACKiNg yOUr mAKErBOT rEPLiCATOr 2X
1a. Place the MakerBot Replicator 2X box on
the ground. Open the box and remove the top
cardboard sheet.
1b. Remove the MakerBot Replicator 2X User
Manual. We recommend that you review
the manual to guide you through the setup
process and keep it handy as you unpack the
contents of the box. If you find that anything
described in the manual is missing, email us
at support@makerbot.com.
1c. Remove the layer of foam and the sheet of
cardboard underneath.
1d. Remove the two protective foam pieces
from the sides of the MakerBot Replicator 2X.
1
Opening the Box
1
B
SETTING UP YOUR MAkERBOT REPLICATOR 2X EXPERIMENTAL 3D PRINTER
2a. Open the plastic covering and firmly grasp
the frame of the MakerBot Replicator 2X.
Be careful not to grip the rods and belts of the
gantry system. Lift it out of the box and place
it on a stable surface.
2
Removing the MakerBot Replicator 2X from the Box