CALIBRATION PG. 7
LAST UPDATE 06.07.19
STEP 22: ATTACH CHAIN TO MOTOR
BAG #1 small nails
PART #3 Chains
• DO NOT CHANGE POSITION OF CHAIN ON
SPROCKET
• Pick up inside end of chain
• Insert small nail through circular piece at
other end of chain
• Hammer into center of beam 8” from end
STEP 21: ATTACH STRETCHY CORD TO FRAME
Bag#1 S hooks
1. Loop stretchy cord around center pulley
3. Insert S-hook in
free loop on other
end of cord
4. Hook temporarily
to same screw as
first loop
2. Loop one end of
stretchy cord to
screw under beam
STEP 24: CONNECT CHAIN TO STRETCHY CORD
• Hold chain and sprocket with one hand, grab s-hook from bottom nail with other hand
• Insert s-hook through center of sprocket
STEP 23: ADD CHAIN TO STATIONARY SPROCKET ON MOTOR
BAG #1 sprockets
• Grab bottom of “u” of hanging chain, pull up and over nail towards center of frame
• Place sprocket in loop of chain, holding onto sprocket and chain for next step