THIS WORK IS LICENSED UNDER THE CREATIVE COMMONS ATTRIBUTION-NONCOMMERCIAL-NODERIVATIVES 4.0 INTERNATIONAL LICENSE.
1.6 BUILDING THE FINAL SLED
DESIGN BY THE MASLOW COMMUNITY, PARTICULARLY USERS DLANG AND MADGRIZZLE
TOOLS NEEDED:
Router, .25” router bit
Screwdrivers
Power Drill, .25” drill bit
Sandpaper
Socket wrench, various sizes
5/16 Allen Wrench
Pencil
Safety goggles
Clamps (optional)
CUT LIST:
(1) 18x18” circle
(2) 1x5.5” rectangles
If using MakerMade
metal brick holders or
pre-made sled these
pieces aren’t needed
MATERIALS LIST:
(1) 4x8 Plywood, .75” thick*
(2) Bricks**
(3) Size 10-32 Machine Screws
Precision Level
Difficulty Level
SLED BASE
BRICK
HOLDERS
1X5.5”
18”
18”
*If you have scrap plywood on hand, it’s not neccesary to buy a whole sheet of plywood
**If using MakerMade metal brickholders bricks should be no more than 4.5” wide, you
can re-use bricks from temporary sled