BUILDING THE DEFAULT FRAME PG. 4
LAST UPDATE 05.22.19
FRONT LEG 79”
KICKER 30”
Spacer & back
leg both go
beneath kicker
11.5”
1.75”
FRONT LEG 79”
KICKER 30”
90º
KICKER
FRONT LEG
KICKER
FRONT LEG
BACK LEG
KICKER
SPACER
FRONT LEG
BACK LEG 60”
KICKER
FRONT LEG
BACK LEG 60”
SPACER
STEP 3/4A ATTACH KICKERS TO FRONT LEGS
• Kickers at 90° angle to front legs
• Kickers 11.5” from bottom of front legs, and
overhanging by 1.75”
• Screw through top of kickers into front legs
• Screw through top of kickers into spacers
• Flip each assembly over for next step
STEP 3/4C POSITION BACK LEGS
• Rotate back legs out to end of kickers
• Screw bottom of back legs to kickers
• Add more screws to top of back legs
STEP 3/4B ADD BACK LEGS
• Place back legs on top of front legs,
aligning bottom ends
• Mark center of back legs 1” from top end
• Screw through top center of back legs
into front legs at marked spot
• Only 1 screw per leg, NO GLUE
Next steps are most easily done
with front legs horizontal to floor,
as shown. Prop with scraps to keep
things level.
LEGS ARE NOW COMPLETE!
