S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 39
4 Power on and Run Device
The chapter describes the related operations of powering on and running the device,
containing the following contents:
4.1 Log into Device
When logging into the device for the first time, you can only log in via Console port. This is the
most basic mode of logging into the device and also the basis of configuring other login modes.
4.1.1 Connect Configuration Cable
S12800 routing switch provides two serial ports (EIA/TIA-232) and (Micro USB 2.0). With the
two interfaces, the user can adopt the PC (or laptop) with the RS-232 serial port (or USB
interface) to configure the switch.
To configure the switch via the PC (or laptop), connect according to the following steps:
Step 1:
Prepare one PC (or laptop). Confirm that the PC (or laptop) has the RS-232
serial port (or USB interface).
Step 2:
After confirming that the switch or PC (or laptop) is powered off, connect the RS-
232 serial port (or USB interface) of the PC (or laptop) with the RJ45 serial port
(or Micro USB serieal port) of the switch via the configuration cable. For details
about the Console cables, refer to
.
