S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 29
Step 2:
Lift the host and place on the bearing pallet and push the chassis into the
cabinet until the mounting ears at the two sides of the chassis fit the square
hole post, as shown in Figure 3-7.
Figure 3-7 Push the chassis to the cabinet
Step 3:
Use the M6 panel screws to fix the floating nuts on the chassis mounting ears
and cabinet post square hole bar, so as to prevent the device from sliding front
and back.
If the screw hole on the mounting ear cannot align to the floating nut
installed on the cabinet correctly, check whether the bearing surface of the
pallet is on the integer U boundary and whether the floating nut is installed
on the correct hole position.
