S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 79
Step 2:
Remove the power dustproof cap according to the arrow direction in the
following figure:
Figure 6-1 Remove the power dust proof cap
Step 3:
Pull out the power cable plug according to the following figure. If the bundle is
tight, you can first loosen the bundle.
Figure 6-2 Pull out the power cable plug
Step 4:
First, press the limit switch according to the following left figure, and then pull
out the changed power module according to the following right figure.
Figure 6-3 Pull out the power module
Step 5:
Insert the new power module.
Push another power module along the guide groove slowly and horizontally until the green
limit snap fastened with the chassis.
