Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
24
8106556-5 02/15
11
Managing Results
Users have the option of printing to the thermal printer or transferring results to the
ERO•SCAN
®
PC Database. Each ERO•SCAN
®
system will include one or more of these
options. Your specific options will vary depending on the configuration of the system
purchased.
11.1
Saving Results
The ERO•SCAN
®
instrument automatically saves the results of completed tests in the non-
volatile memory (meaning tests are saved even if the battery is temporarily discharged).
However, the ERO•SCAN
®
is not intended for long-term storage of test results.
NOTE: Users are strongly encouraged to print/transfer all test results at the completion of
testing to avoid potential loss of data.
When operating in the default "Save L/R" mode, the ERO•SCAN
®
instrument will save the
most recent test results for each ear and print/transfer only these results. This allows the
user to retest a patient after a “REFER” result and to print/transfer only the most recent test
result for each ear. It is recommended that the results be printed after each patient in the
default mode.
When operating in the "Save 250" mode, the ERO•SCAN
®
will save up to 250 tests. There
are two options in the “Save 250” mode:
1. The ERO•SCAN
®
will automatically number each test from 1 to 250. This
allows the user to save all tests for each patient (tests of the same ear are
NOT overwritten) and to test multiple patients before printing or
transferring results. In this mode, it is important to keep a record of the test
number(s) for each patient.
2. The ERO•SCAN
®
Database Software is used to transfer patient names to
the ERO•SCAN
®
and the ERO•SCAN
®
will display the names. When patient
names are used (patient names are uploaded from the ERO•SCAN
®
Database Software to the ERO•SCAN
®
unit) the patient names are
displayed on the ERO•SCAN
®
Unit in the same order as displayed on the
Database Software. To move to a different name than the one displayed
on the ERO•SCAN
®
screen, use the
LEFT or RIGHT
arrows to cycle
through the names until the desired name is on the display. A patient
named “Unnamed” is always included at the beginning of the ERO•SCAN
®
list for instances when a patient is being tested, but the patient name was
not transferred to the ERO•SCAN
®
. The “Unnamed” selection can be used
multiple times when transferring to the Database Software.
See
Instrument Settings – Save Mode on page 40 for information on changing the save
mode settings.
Summary of Contents for ERO SCAN
Page 2: ......