Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
26
8106556-5 02/15
The ERO•SCAN
®
will search for the paired printer showing
Display 10 while searching. When the printer is found, all the
test results that are stored in memory will print out
automatically.
The ERO•SCAN
®
instrument will power off when printing is
complete.
NOTE: All printed test results are marked for deletion, but will
continue to be stored in memory until a new test is started at
which time all tests in the memory will be erased. This allows
the user to reprint the tests if printing is unsuccessful (for
example, the paper runs out before printing is complete).
NOTE: See the ERO•SCAN
®
Database Software Manual for
instructions on printing from the Database Software.
11.4
Connecting to the PC Database Software
Connection to the PC database software is achieved by using the provided Micro-USB to
USB-A cable or via Bluetooth
®
.
USB Connection:
Plug the correct end (USB-A) of the cable into an available USB port on the computer and
the correct end (Micro-USB) of the cable into the port found on the bottom of the
ERO•SCAN
®
instrument.
The ERO•SCAN
®
instrument will detect the connection to the PC and wait for an action or
communication from the PC database software.
Bluetooth
®
Connection:
Refer to the ERO•SCAN
®
Database Software Manual for connection via Bluetooth
®
.
NOTE: See the ERO•SCAN
®
Database Software Manual for instructions on using the
application.
Display 10
Summary of Contents for ERO SCAN
Page 2: ......