
Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
52
8106556-5 02/15
Message
Solutions
Attach
Probe
Probe not detected. Check that the probe connector is fully
seated in the socket.
Disconnect and reconnect the probe.
Cycle instrument power.
Contact MAICO for service if the problem persists.
BT Device
Not Found
Paired to Printer:
o
Check that the printer is turned on.
o
Move closer to the printer.
o
Try again.
Paired to PC Computer or Bluetooth
®
dongle:
o
Check that the serial port is open. Establishing the serial
port is handled by the PC and/or the software, not by
the ERO•SCAN
®
instrument.
BT Error
#xxx
Check BT device (printer or PC) status.
Attempt to connect to BT device again.
Contact MAICO if the problem persists.
BT Not
Configured
Printing has been attempted, but no BT device is paired with
the ERO•SCAN
®
Instrument. Establish Bluetooth
®
pairing.
Device Not
Responding
The printer is not responding to queries from the instrument.
Check printer status.
Awaken printer from sleep mode.
Charge printer battery if necessary.
Due for Service
Indicates calibration of instrument is recommended. Message
will appear upon the calibration due date set in the device.
Message appears during device startup once per day.
Fit Error
Cannot Obtain L
For a DP test, the desired level (L1 or L2) cannot be obtained
within allowable limits. User should refit the probe and retry
the test.
Replace the probe tube.
Contact MAICO for service if the problem persists across
several patients.
Fit Error
Too High
For a DP test, the level of the calibration tone is too high. User
should refit the probe and retry the test.
Replace the probe tube.
Contact MAICO for service if the problem persists across
several patients.
Fit Error
Too Low
For a DP test, the level of the calibration tone is too low. User
should refit the probe and retry the test.
Replace the probe tube.
Contact MAICO for service if the problem persists across
several patients.
Summary of Contents for ERO SCAN
Page 2: ......