Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
35
8106556-5 02/15
14.2
Understanding the TEOAE Printout
The following information is provided for each test (Figure 15):
1)
The software version number (e.g.: V100.01)
2)
The time and date of the test, based on the setting of
the internal clock; if the clock is set correctly, this time
and date will be correct
3)
The test number (if operating in “Save 250” mode)
(e.g.:001)
4)
The protocol selected (e.g.: TE 32s)
5)
The averaging time used for this test (e.g.: 10 sec avg.)
6)
Instrument/Probe serial number (SN)
7)
The ear selected (Right or Left)
8)
A PASS/REFER indication if there is a criterion set for the
selected protocol
9)
The open blocks indicate the noise floor in dB SPL
10)
The solid blocks indicate the emission level in dB SPL
11)
The frequency band center (F)
12)
The level of the emission in dB SPL (TE)
13)
The noise floor in dB SPL (NF)
14)
The signal-to-noise ratio (SNR) = TE – NF
Figure 15
Summary of Contents for ERO SCAN
Page 2: ......