Operation Manual easyScreen
8508935 Rev. 4
13
04/04/2019
2.5 General Precautions
Before starting a measurement make sure, that the device
works properly.
Use and store the device indoors only. For operation,
storage and transport conditions see table in section 6.
Do not drop or otherwise cause undue impact to this device.
If the device is dropped or otherwise damaged, return it to
the manufacturer for repair and/or calibration. Do not use the
device if any damage is suspected.
Equipment is not user repairable. Repairs must be
performed by a qualified service representative only. No
modifications of the equipment are allowed by anyone other
than a qualified MAICO representative. Modification of the
equipment could be hazardous.
No parts of the equipment can be serviced or maintained
while in use with the patient.
Use of accessories, transducers and cables other than
those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this
equipment and result in improper operation. The list of
accessories, transducers and cables can be found in the
EMC appendix of this instruction.
2.6 Electrical and Electrostatic Safety
For OAE
: This icon indicates that patient applied parts of the
device conform to IEC 60601-1 Type B requirements.
For ABR
: This icon indicates that patient applied parts of the
device conform to IEC 60601-1 Type BF requirements.
The system is internally powered.
In Case of Emergency
In case of emergency, disconnect the device from the
computer.
WARNING
WARNING
WARNING
WARNING
WARNING
Summary of Contents for easyScreen
Page 1: ...easyScreen Operation Manual...
Page 2: ...Blank Page...
