12
INSTALL THE CONTROL BOX IN ITS SUPPORT
Put the control box (item 1) in its support (item 2).
Secure on place with the knob (item3).
SECURE CABLES.
Insert the cables (item 1) through the opening of the
cable holder (item 2).
IMPORTANT :
Be careful to secure the cables to
avoid any damage caused by a contact with the
vehicle, equipment itself (especially engine exhaust)
or any other object that can be found in the area of
these cables.
Attach the electrical cable and the engine control
cable to the equipment and to the vehicle, if
necessary use cable ties.
Do not forget :
the control box must be easily
removable from vehicle.
If needed, re
-
adjust the position of the cable support
(item 2) to avoid any interference with the control
cables while towing vehicle is in motion.
IMPORTANT:
Before operating this equipment
proceed with all the adjustments required in section
« Adjustments ».
ASSEMBLY
