14
OPERATION
Item 1: Ignition switch.
Using the key: Allows to start the engine or you may
turn the key to the accessory setting to activate the
controls without starting the engine. The light (item 7)
is on when the key is turned to the accessory or start
setting.
Always remove the key when the equipment is left
without surveillance.
Item 2: Throttle lever
Push towards the front to increase engine speed,
push completely to the end to ‘’start’’
Item 3: Emergency switch
Push to stop equipment quickly.
Item 4: Safety lanyard:
Links the operator to the control box. If the operator
leaves the driver’s seat without stopping the
equipment, the equipment will stop (the cable will
disconnect itself from the control box).
7
3
5
8
4
2
1
6
front
back
1
Stop
Accessory
Engine start
Engine running
WARNING
TO PREVENT INJURIES:
Always disengage electric clutch, engage parking
brake, shut off vehicle, remove ignition key, and wait
for all moving parts to come to a complete stop
before dismounting from vehicle.
WARNING
It is a possibility that in certain cases, the safety
lanyard may be too long and will not function
properly due to where the control box is
installed on the vehicle and where the lanyard is
attached to the operator.
IT IS THE OPERATOR’S RESPONSIBILITY
To make sure that the lanyard is well installed so the
equipment stops when the operator leaves the seat.
IF REQUIRED:
Shorten the lanyard making sure it retains its
original and adequate resistance.
FAMILIARIZATION WITH THE CONTROL BOX
Item 5: Engagement switch
Pull to engage, push to disengage the electric clutch.
The light (item 8) is on when equipment is engaged.
Item 6: Height adjustment switch.
Allows to adjust the cutting height.
WARNING
Read the vehicle's owner’s manual carefully. Be
thoroughly familiar with the controls & proper
use of the attachment. Know how to stop the
unit & disengage the controls quickly
.
