DANGER
BLINDNESS CAN
RESULT FROM
BATTERY EXPLOSION.
KEEP SPARKS OR OPEN
FRAMES AWAY FROM
BATTERY.
DO NOT JUMP START.
BURNS CAN RESULT
FROM BATTERY ACID.
IN CASE OF CONTACT
FLUSH IMMEDIATELY
WITH WATER
WARNING
●
Pull only from drawbar. Pulling from any other
point can cause rear overturn.
●
Do not operate with unshielded PTO.
●
Disengage PTO and stop engine before
servicing tractor or attaching and detaching
implements.
●
When towing equipment use a Safety chain
FAILURE TO FOLLOW ANY OF THE
INSTRUCTIONS ABOVE CAN CAUSE SERIOUS
INJURY TO THE OPERATOR OR OTHER
PERSONS
.
Location: On battery bracket RH
Part No.: 1260-904-066-0
Location: On rear frame
Part No.: 1260-904-065-0A
WARNING
●
Start engine only from operators seat. If safety start
switch is bypassed engine can start with transmission
in gear.
●
Do not connect or short across terminal on starter
solenoid.
Attach booster cables as shown on battery decal and
operator’s manual.
Starting in gear causing runaway can result in serious
injury.
Location: On dash over side LH
Part no: 1260- 904-062-0A
1-13
Summary of Contents for 2810
