Mahindra 2810, Service Manual

Page: 106 / 223

(6)
REAR PTO counter shaft mechanism
Fig.5-50
1.Gear,spur 12 2.Gear spur 14 3. Snap ring(shaft) 4. Ball bearing(6205) 5. Ball bearing(6305)
Note:
- When pushing the R.B.B’s(6305,6205) into the gear ,spur 12,be careful only to push
their inner races.
- The snap ring C should be securely seated in the groove and the press-processed side
turned towards the outer side.
- Be sure not to mix different pairs of the gear(spur/14).
- Every time a gear is installed,its smooth rotation should be checked.
a. REAR PTO shaft
1.Shaft PTO
2.Snap ring
Note:
The snap ring C should be securely seated in the groove and the press-processed side
turned towards the outer side.
Fig.5-51
b.REAR PTO shift stay
1.Stay PTO shift
2.O- ring
Fig.5-52
Note:
- When installing the O-ring to rear transmission case,take care not to damage it or
allow to fall.
5-38