75
© 2012 Magnum Energy, Inc.
10.3.2 Monitoring the AGS using the ME-RTR
The ME-RTR router has additional menus that are helpful for the proper op-
eration and monitoring of your AGS system.
10.3.2.1 ME-RTR Router’s AGS METER Button
From the AGS Home screen, press the routers METER button, and then ro-
tate the SELECT knob to view the following read-only menus.
10.0 Using the ME-RTR Router
AUTO:
This selection uses the settings from the SETUP buttons
04 AGS Setup
menus to automatically start and stop the generator. Refer to the
04 AGS Setup
menus in Section 10.1 to set the start and stop parameters for the generator.
ON:
This selection manually starts the generator by sending a start
command from the AGS. Once the generator is started, it must be manually
stopped, either from an external stop switch or by selecting
OFF
from the
03
Gen Control
menu, which sends a stop command from the AGS module.
Info:
When
ON
is selected, the Magnum inverter will not attempt to
accept the generator AC voltage until the warm-up period is satis
ed.
Info:
Manually start the generator and have it automatically stop by
selecting
ON
from the
03 Gen Control
menu once the generator is
running, and then changing the selection to
AUTO
to automatically
stop the generator. When the generator has been manually started,
and then the
AUTO
setting is selected, the AGS status displays as
Start VDC
and uses the autostop setting under the SETUP buttons
04A Gen Run VDC
menu (even if not active) or the
04F Max Gen Run
Time
menu, whichever occurs
rst. This manual on, auto off feature is
useful if you want to make sure the generator starts before you leave.
OFF:
This selection turns the generator off if it is running from either a manual
on command or an autostart command. When
OFF
is selected, the AGS is
prevented from starting the generator automatically. This is the default setting.
Info:
When
OFF
is selected, the AGS turns off immediately without
any cooldown time (if set). However, if the generator is manually
started from a generator control panel or a generator remote panel,
selecting
OFF
may not shut down the generator.
Info:
If DC power is lost to the remote or to the inverter system,
this menu resets to the default
OFF
position for safety.
10.3 ME-AGS-N Operation/Monitoring using ME-RTR
This section covers the menus under the ME-RTRs CTRL, METER, PORT and
TECH buttons that determine how to control and operate the generator. The
section also includes menus that are used to help monitor the AGS and the
generators starting and running conditions.
10.3.1 Controlling the AGS using the ME-RTR
The AGS uses the
CTRL: 03 Gen Control
menu to activate the generator either
manually or automatically. From the AGS Home screen, press the CTRL button
on the ME-RTR router and rotate the SELECT knob to the
03 Gen Control
menu.
CTRL: 03 Gen Control
This menu is used to manually turn the connected generator on and off, or
to select the
AUTO
feature which enables the active generator autostart and
autostop settings to control the connected generator. Available options are:
