79
© 2012 Magnum Energy, Inc.
10.0 Using the ME-RTR Router
To manually start the generator and have it automatically stop:
From the AGS Home screen (to access, refer to Section 10.2.1.1):
1. Press the CTRL button.
2. Turn the SELECT knob to the
03 Gen Control
menu.
3. Press the SELECT knob. The
Set Gen Control
menu displays with an arrow
to the right of the current setting.
4. Turn the SELECT knob to the
ON
setting.
5. Press the SELECT knob to select the
ON
setting. The selection arrow ap-
pears to the right of the screen. The generator should start at this time.
After the generator is running, rotate the SELECT knob to
AUTO
(under the
CTRL: 03 Gen Control
menu), and then press the SELECT knob to select the
AUTO
setting.
Note:
When the generator is manually started, and then changed to autos-
top, the
SETUP: 04A Gen Run VDC
settings are used to determine when the
generator will autostop. If the
SETUP: 04A Gen Run VDC
is set to
OFF
, the
Start/Stop Volts Delay
and
Stop Gen Volts
values that were entered prior to
selecting
OFF
will still be used to autostop the generator.
If the generator does not start or stop as expected, refer to Section 12.0
ME-AGS-N Remote Troubleshooting in this manual.
To manually stop the generator:
From the AGS Home screen (to access, refer to Section 10.2.1.1):
1. Press the CTRL button.
2. Turn the SELECT knob to the
03 Gen Control
menu.
3. Press the SELECT knob. The
Set Gen Control
menu displays with an arrow
to the right of the current setting.
4. Turn the SELECT knob to the
OFF
setting.
5. Press the SELECT knob to select the
OFF
setting. The selection arrow ap-
pears to the right of the screen. The generator should stop at this time.
If the generator does not stop as expected, refer to Section 12.0 ME-AGS-N
Remote Troubleshooting in this manual.
To manually start the generator:
From the AGS Home screen (to access, refer to Section 10.2.1.1):
1. Press the CTRL button.
2. Turn the SELECT knob to the
03 Gen Control
menu.
3. Press the SELECT knob. The
Set Gen Control
menu displays with an ar-
row to the right of the current setting.
4. Turn the SELECT knob to the
ON
setting.
5. Press the SELECT knob to select the
ON
setting. The selection arrow ap-
pears to the right of the screen. The generator should start at this time.
If the generator does not start as expected, refer to Section 12.0 ME-AGS-N
Remote Troubleshooting in this manual.
