46
OPERATION
Ceiling lights
There are two ceiling lights on the cab roof on either
side of the driver’s seat, which can be individually
operated with the switch at the front of each one.
Emergency exit
A red hammer is present inside the cab, on the right of
the door jamb; it must be used in case of an
emergency to break the glass of the door and/or
window to make exit easy for the driver.
Do not try to use the windscreen as an emergency exit:
the windshield is made of laminated glass, and can
therefore be broken but not shattered.
Contact your dealer to have the glass replaced.
Seat
The driver’s seat is designed in accordance with law to
allow a correct posture and prevent the onset of
musculoskeletal disorders for the driver following
prolonged working activities.
Always adjust the seat to suit your physical structure
for maximum comfort.
Use the seat adjustment controls in the order in which
they are described.
Seat suspension
Turn regulator nut
1
of the spring suspension of the
seat to adjust the preload.
The adjustment is correct if the numeric indication on
the ring nut corresponds approximately to the driver’s
weight including the clothing.
Longitudinal position of the seat
Use the lever
2
to move the seat in the longitudinal
direction. With this lever the arm rests and relative
controls remain fixed.
The adjustment is correct if the operator can grip the
joystick without shifting the elbows, with the arm
completely relaxed and placed on the armrests.
Adjusting the seat height
Use lever
3
to raise or lower the seat in relation to the
floor.
The adjustment is correct if the operator’s knee is bent
at right angles with the feet resting on the floor.
Longitudinal position of the work station
Act on lever
4
to move the driver's seat in the
longitudinal direction. With this lever the arm rests
and relative controls move along with the seat.
The adjustment is correct if the operator is able to act
easily on all the pedals, and these do not obstruct the
positioning of the feet on the floor.
Tilting the backrest
Use lever
5
on the left side of the backrest to adjust
the inclination with respect to the seat.
1
3
2
4
5
6
Summary of Contents for RTH 4.18
