Magni RTH 4.18, Use And Maintenance Manual

Page: 40 / 127

40 OPERATION
Indicator lights
Fuel tank in reserve
Diesel engine oil pressure alarm
Diesel engine temperature alarm
Hydraulic motor oil filter clogging alarm
Water/fuel separator filter clogging alarm
SCR Alarm
Hydraulic fluid temperature alarm
Hydraulic fluid tank filter clogging alarm
Batteries flat alarm
Diesel engine suction filter clogging alarm
AdBlue tank in reserve
(on models with urea tank)
Generic diesel engine alarm
Serious diesel engine alarm
Generic transmission alarm
Generic hydraulic system alarm
Parking brake on
Service brake system alarm
Generic electrical system alarm
Telescopic boom shock absorber activated
AdBlue level alarm for TIER4 drive unit
AdBlue level alarm for TIER4 drive unit
Front wheels alignment
Rear wheels alignment
Rear axle block applied
Telescopic boom orientation
The accessory fitted at the top of the boom is shown
in the centre of the page. In the case shown above, the
control unit detected the presence of a fork carriage
with 5000 kg capacity.
The turret rotation is shown right below it. There is a
numeric indication expressed in degrees, and a
graphic indication with a needle. The numeric
indication increases for clockwise turret rotation.
The turret rotation indicator is present in all the
control and command pages for rapid display.
Vehicle levelling indicator
Vehicle levelling means the inclination of the chassis
with respect to an ideal perfectly horizontal flat
surface. Vehicle levelling is not the inclination of the
chassis in relation to the ground.
A circular green marker in the centre of the page
provides graphic indication of the vehicle levelling.
In case of imbalance, the marker moves in the
direction of the vehicle’s centre of gravity. In the
example in the figure, the marker is in the centre, so
the vehicle is perfectly level. When the vehicle leaves
this range by 3° the marker changes to flashing yellow.