Swing Door
MPS-122
Setting swing door parameters – "MPS-Diag"
73
10.8 Status
request
Reading the conditions of the in- and outputs right at the MBC-111
is only possible after disassembly after removing the outer tube
with the locking element. Therefore, the programme MPS-Diag
offers the possibility of reading the status of the in- and outputs
through the serial interface.
NOTE!
The states of the DIP switches for parametrisation
of hte CAN bus cannot be read via MPS-Diag. This
is only possible directly at the control. Therefore,
these settings must be checked before the MPS is
assembled!
Fig. 57: Reading states of the inputs and outputs and DIP switches
