Magnetic Autocontrol MPS-122, Operating Instructions Manual

Page: 60 / 90

Swing Door MPS-122
Setting swing door parameters – "MPS-Diag"
60 5817,0011EN / Version 04
10.4 Function and parameter settings
Function and parameter settings are made through the Windows
programme MPS-Diag.
The following functions can be set:
 Design left / right
 Brake activated / not activated in the three positions, in case of
vandalism or when pressed in the wrong direction
 Present locking element size
 Reset source
 Behaviour when obstruction detected
 Hold-open time
 Speeds

Heating active while standing

Programming the two end positions and the home position

Resetting all parameters to factory settings
10.4.1 Version left / right
This selection point informs the control whether it is a right or a left
version of the swing door. In the "right" version, the locking bracket
swivels against the right mechanical end stop when homing. In the
"left" version, the locking bracket swivels against the right
mechanical end stop when homing.
Fig. 28: Explanation on version "Right" and "Left",
here the directions for the left swing door are presented