Swing Door
MPS-122
Mechanical settings and final installation
42
7.2.2
Mounting wings
NOTICE
Risk of breakage!
Mounting the glass wing without the rubber inserts
may cause the glass wing to break. In this case,
the glass wing is excluded from warranty.
– Only install the glass wing with the 6 rubber
inserts. The rubber inserts must be placed
between glass wing and holder halves.
Mag00626a
1
2
3
4
5
6
5
Fig. 19: Mounting glass wings
1 Glass
wings
2 Outer
tube
3
Screws M6 (6)
4
Front holder half (3)
5
Rubber inserts (6)
6 Safety
pin
CAUTION!
Danger of crushing!
1. Disconnect swing door from power supply. Ensure that the
system is powered down. Secure against reactivation.
2. Thoroughly clean the glass wing with glass cleaner.
3. Loosen all 6 screws M6 at the 3 holders.
4. Remove the front holder halves and rubber inserts.
5. Put the glass wing on the safety pins.
