Swing Door
MPS-122
Setting swing door parameters – "MPS-Diag"
64
10.4.9 Teaching
the
three possible positions
The MPS is delivered with 2 x 90° opening angles by default.
However, the three positions can be changed independently. For
this, there is an input mask in MPS-Diag.
Fig. 37: Activate screen mask for adjusting
the target positions
Setting the target positions is a process with several stages.
Fig. 38: Setting the target positions
1. Perform homing. Put the MBC control into service mode for
this. Then you can adjust the three positions.
Fig. 39: Perform homing
