Swing Door
MPS-122
Commissioning and settings
46
8.3 Initial
commissioning
Free movement path
Ensure that the swing door can take up operation unhindered. The
movement path of the locking element must be free.
Initial commissioning
1. Switch on power supply. If required, switch on the locking
element via the 2-pin main switch.
2. At initial commissioning, the software for the motor control unit
MMC-120 may be loaded from the logic control unit first. This
process may take up to one minute. Do not switch off the
power supply during this time, since this would require
repeating the process. This process will not be necessary
when switching on the power supply in future.
3. The swing door performs homing. First the two mechanical
end stops and then the home position are controlled. If
required, adjust the end stops.
→
NOTE!
Functions and parameters can be changed via the
programme "MPS-Diag".
→
