Swing Door
MPS-122
Setting swing door parameters – "MPS-Diag"
56
Use included driver
If the installation of the driver by plugging in the USB cable does
not work automatically, you need to install the driver subsequently.
1. Start setup of the programme "MPS-Diag".
2. Perform installation according go setup assistant.
3. As a last step, the view "Terminating the MPS-Diag" appears.
4. Activate the check box "Install USB driver" to install the
included driver automatically.
5. Click the button "Finish".
6. Use the "Device Manager" to determine the port number and
enter it in the programme "MPS-Diag".
→
See page 57,
chapter 10.1.3.
If the entry in the device manager is missing, you need to
install the driver manually.
→
See following chapter.
10.1.2 Manual driver installation
Using the driver from the
internet
1. Open the window "Device Manager".
2. Click the entry "USB serial port". The window "Properties USB
serial port" is opened.
3. Click the button "Update driver". The screen "Update driver
software" appears.
4. Select the option "Automatically search for driver software".
Your operating system searches your computer first, then
the internet.
The driver is installed automatically. After successful
installation, the message "The driver software was installed
successfully" will be displayed.
5. Use the "Device Manager" to determine the port number and
enter it in the programme "MPS-Diag".
→
See page 57,
chapter 10.1.3.
If the entry in the device manager is missing, you need to
install the included driver manually.
→
See following
chapter.
Alternatively, you may also download the latest driver
under the following link: http://ftdichip.com/Drivers/VCP.htm
Use included driver
If you don't have an internet connection, you can simply use the
included driver. The driver is located in the directory:
"…\bin\Driver\USB\FTDI\".
1. Unpack
file.
2. In the tab "Driver", click the button "Update driver".
3. Click the option "Automatically search for computer for driver
software".
4. Enter or select the path for the driver.
