Magnetic Autocontrol MHTM MicroDrive Access Series, Operating Instructions Manual

Page: 98 / 144

Barrier MHTM
TM
MicroDrive Access and Parking
Start-up and operation
98 5815,5013US / Version 05
10.2 Commissioning
Check before
to initial start-up
The following inspections must be performed prior to initial start-up:

Checks whether the transport protection was removed.

Check electrical connections.

Check barrier arm position.

Check balancing springs in the lever system and adjust if
required.
Inspection during the
first start-up
The following inspections must be performed prior to first start-up:

Check programme mode. → See separate document
"Description of control units MGC and MGC Pro for MHTM
TM
MicroDrive barriers", chapter "Select programme mode".

Check parameterisation in connection with wiring.

Testing and setting the operating frequency of the induction
loops. → See separate document "Description of control units
MGC and MGC Pro for MHTM
TM
MicroDrive barriers", chapter
"Detector 1 (A-B)".

Check the function of the barrier, induction loops, and the
signalling devices.