Magnetic Autocontrol MHTM MicroDrive Access Series, Operating Instructions Manual

Page: 21 / 144

Barrier MHTM
TM
MicroDrive Access and Parking
Safety
5815,5013US / Version 05 21
Entering the danger area
of the barrier
WARNING
Danger from entering the danger area!
The MAGNETIC MHTM
TM
MicroDrive barriers are
intended exclusively for closing off passages for
motor vehicles and trucks. For vehicles that cannot
be detected by induction loops, additional safety
measures must be provided. Entering the danger
area can cause severe or lethal injuries.
Therefore, the operator must take the following
measures:
– Observing country-specific laws and
regulations.
– Presence of persons and animals must be
excluded.
– Marking the danger area by prohibition signs for
persons, bicyclers, etc.
– If required, set up barriers such as fences and
railings.
– If required, set up separate passageway for
persons and bicycles.
Closing arm WARNING
Danger from closing arm!
A closing arm may cause severe or lethal injury to
persons, bicycler and cabriolet drivers!
– Install safety installations, such as a
MAGNETIC safety light barrier as surveillance
device. The surveillance device must prevent
the closing of the barrier in case a person or a
vehicle is standing below the barrier.
– Only use barrier arms approved of by
MAGNETIC.
– Assemble edge protection.
– If the edge protection was damaged it must be
replaced immediately or the barrier must be
taken out of operation.