Magnetic Autocontrol MHTM MicroDrive Access Series, Operating Instructions Manual

Page: 100 / 144

Barrier MHTM
TM
MicroDrive Access and Parking
Start-up and operation
100 5815,5013US / Version 05
Switching off 1. Remove the barrier housing hood.
2. Remove the barrier housing door.
3. Switch off the barrier via the double pole mains switch.
4. Depending on the settings of the lever system's balancing
spring and the settings in the menu "Power failure", the barrier
boom opens or closes. → See separate document
"Description of control units MGC and MGC Pro for MHTM
TM
MicroDrive barriers", chapter "Power failure".
5. Mount the door.
6. Attach and lock the hood.
10.4 Opening and closing the barrier manually
You can only open and close the barrier manually in the "Service"
mode.
Fig. 45: Service switch
1 Mode "Service" on
2 Mode "Service" off
1. Switch the "Service" switch for the "Service" mode. The LED
lights red. The display backlighting flashes.
2. Perform one of the following functions:

Push middle left button : Manually open the barrier.

Push middle right button : Manually close the barrier.
3. Switch "Service" switch. The LED must light green.
NOTE!
For reasons of safety, the first barrier arm motion
after switching between programme mode and
service mode is performed at slow speed.