Magnetic Autocontrol MHTM MicroDrive Access Series, Operating Instructions Manual

Page: 120 / 144

Barrier MHTM
TM
MicroDrive Access and Parking
Repair
120 5815,5013US / Version 05
13 Repair
13.1 Safety
→ See also safety notes on page 18, chapter 2.6 "Occupational
safety and special dangers".
General WARNING
Danger by inappropriate repair!
Inappropriate repair can cause severe or lethal
injuries.
– All repair work must only be performed by
authorised MHTM service specialists.
– Prior to work, ensure that there is sufficient
assembly space.
– Pay attention to tidiness and cleanness at the
assembly site! Loosely stacked or lying around
components and tools are accident sources.
– Only use original spare parts or spare parts
approved of by MAGNETIC. Procure spare
parts from your dealer or directly from the
manufacturer. For the address, see invoice,
delivery note or the reverse of these
instructions.
– After completion of repair work, ensure that all
covers are correctly mounted.
Switching off power supply WARNING
Risk of injury and damage by switching off
power supply of the barrier!
In case the power supply is switched off and the
barrier arm is not mounted, the drive unit and the
lever system may be damaged or cause severe or
lethal injuries.
– Only switch off power supply when either the
barrier arm is mounted or the balancing springs
in the lever system are relaxed. If the balancing
springs are relaxed, the flange is vertical.
Personal protective equipment The following must be worn during all repair work:

Work clothes

Protective gloves

Safety shoes

Protective helmet.