![background image](http://html1.mh-extra.com/html/magnetek/gpd-205/gpd-205_technical-manual_3603701021.webp)
1
1..5
5..4
4 IIn
ns
sp
pe
ec
cttiio
on
n..
After wiring is complete, verify that:
All wiring is correctly installed.
Excess screws and wire clippings are removed from inside of unit.
Screws are securely tightened.
Exposed wire does not contact other wiring or terminals.
CAUTION
If a FWD or REV run command is given from the control circuit terminal when
the operation method selection function (
n02 ) is set to “ 1 ”, “ 3 ”, or “ 5 ”,
the motor will start automatically as soon as power is applied to the main
circuit.
12
for more: efesotomasyon - Yaskawa drive