Magnescale SR138-025R, Instruction Manual

Page: 75 / 180

(E) 23
English
<10> Connecting the interface unit to a counter
unit
When the connection cable must be electrically adjusted for the
SR138R series, see “4. Electrical Adjustment of the Connection
Cable Circuit”.
1
Check that the counter unit power is off. Then, connect the
interface unit of the connection cable with the connector 1-3
on the rear panel of counter unit.
Note
Check the scale unit mounting axis and counter unit insertion.
2
Secure the interface unit using the screws. (Tightening
torque: 60 N
· cm)
Fig. 3-21
Interface unit
Rear panel of counter unit