Magnescale SR138-025R, Instruction Manual

Page: 59 / 180

(E) 7
English
CH04-03C
4
1 3
7
6
8
2
5
2-2. Connection Cable
CH04 : included only with the GB-ER series
6
Combination No.
For the GB-ER series, this is the same as the serial No. of the
matching scale unit.
7
Status lamp
This is a lamp for checking the signals.
Lit green : Normal
Lit red
: Error (Overspeed, cable disconnection, invalid
signal)
8
Interface unit tap for fixing
The interface unit can be secured in place using the supplied
fixing plate and screw. (M3 depth 3 mm)
1
Interface unit
This is connected to the rear panel of the counter unit.
The interface unit incorporates circuits that have been
electrically adjusted to the optical setting.
2
Conduit cable
This protects the internal cables.
3
Model name
This indicates the cable model name.
4
Round connector (female)
This connects with the round connector (male) on the scale
unit.
5
Input/output connector
Scale signals and reference point signals are output when
DC +5 V is supplied as the power source.
Round connector
(female) Conduit cable
Interface unit
Combination No.
Model name
Note
When procured separately, electrical adjustment is necessary.
Status lamp
Input/output connector
Interface unit tap for fixing